Russ

(inb4 ethernet over HDMI: There is no implementation of the spec in the wild).

How about Thunderbolt? This looks like macOS, and while I’m not 100% sure if they utilize HDMI ports anymore, they certainly use Thunderbolt.

That’s quite unfortunate to hear. I use Bitwarden along with Gboard and very rarely run into issues - I believe most password managers have a quick settings toggle that you can add into your notification drawer to maybe get around this? From what I know though, these generally use the Accessibility framework to function, and thus will heavily depend on your password manager - it also gives a lot more access to those apps than the built in autofill framework.

Conversely I remember Bitwarden’s autofill support on iOS being quirky when I last used it (which to be fair, has been a while - I’m sure its improved since then). IIRC it pretty much always worked in Safari (and Safari Web Views within apps), but the actual applications themselves wouldn’t always give me the autofill prompt.

For me though, regardless of the platform it still is far more worth using a password manager and unique passwords per-site than to use a single password (or even a handful) across sites. I hope autofill support improves for those that it doesn’t work well with.

It depends on who you’re referring to as a casual user. My mother for example would certainly have a hard time with it, then figuring out the key to bring up the boot menu (and being faced with a scary dialog that they’ve never seen), then selecting the right device, then likely being faced with GRUB which would also look scary to her, and by then she’d be overwhelmed before even getting to the install portion.

Nowadays I primarily just go with Arch, it works “fine enough” for my use cases (software dev and gaming) and the AUR truly does just about have everything that I’ve ever wanted to install.

That is not to say that it doesn’t have its issues though, a while back ago I was using EndeavourOS and my PC completely locked up (seemed like a kernel panic) in the middle of pacman running a system upgrade and it borked the whole install. I haven’t gotten around to migrating my home folder to its own partition (it is in its own btrfs subvol though), so I just went with installing Arch and choosing to keep the btrfs home subvolume so that the base system was replaced, yet my home folder was preserved. I’m sure that I could’ve fixed the issue in a chroot, but it was easier to just wipe everything outside of my home folder and just start fresh.

I am heavily interested in Atomic systems, the above issue being one of the bigger reasons, but I would continuously run into walls when trying to use non-flatpak software. Most of the Atomic distros have a way to effectively spin your own image, but at the moment I just don’t have the time to learn how to do it. NixOS fell into a similar boat for me, Nixpkgs is quite large but I’d have things randomly break because they’re expecting a FHS compliant layout (such as some of my dev tools) and while I’m sure I could eventually learn how to fix it, Nix’s docs are… not the best, and I ran into time constraints again.

I’ll eventually circle back to reviewing Atomic distros and spinning up my own custom image once things in my life settle down a bit, but there’s just too much chaos for me to justify throwing another wrench into it when Arch for the most part does what I need it to do.

My desktop also used to have a Nvidia GPU in it, and is one of the reasons why I started using Arch in the first place - they were pretty much always the first to get the Nvidia driver updates. Thankfully I switched to AMD (a 6700 XT) about a year ago and that specifically hasn’t been an issue (and allowed me to explore more distros without having to worry about how the Nvidia installation/update process was - its not really complicated on any of the distros, but its an additional step unless you use something like Pop that has the drivers preinstalled).

However I do also use Fedora on my old MacBook, I tend to only use it for lightweight browsing and occasionally SSH’ing into some systems and I’ve quite enjoyed Fedora so far.

I try to keep all of the distros I’ve tried out, with their current versions and previous versions (if it makes sense), such as:

• Arch
• NixOS
• Fedora
• Debian
• Ubuntu
• Pop!_OS
• Bazzite (and their friends Aurora & Bluefin)
• Even Windows 10 >_>

I’ve stopped distro hopping as much as I used to, but I do keep a much smaller partition around for playing with another distro if I want to (such as the latest test version of Pop that includes the COSMIC epoch alpha release). I’d say that you definitely don’t need a 128GB flash drive, but the last 16GB flash drive I was using pretty much died and when I went to get a new one, the difference between 16/32/64/128 was negligible enough that I just decided to get a 128 one and never deal with storage issues on it again. Plus, you can tell the Ventoy installer to leave some free space for a non-ISO partition to keep other stuff on it as well.

Can confirm, Ventoy is fantastic! I just keep one 128GB USB drive with a ton of ISOs on it and that does the trick!

Hmm, gotcha. I just tried out a fresh copy of text-gen-webui and it seems like the latest version is borked with ROCM (I get the CUDA error: invalid device function error).

My next recommendation then would be LM Studio which to my knowledge can still output an OpenAI compatible API endpoint to be used in SillyTavern - I’ve used it in the past before and I didn’t even need to run it within Distrobox (I have all of the ROCM stuff installed locally, but I generally run most of the AI stuff in distrobox since it tends to require an older version of Python than Arch is currently using) - it seems they’ve recently started supporting running GGUF models via Vulkan, which I assume probably doesn’t require the ROCM stuff to be installed perhaps?

Might be worth a shot, I just downloaded the latest version (the UI has definitely changed a bit since I last used it) and just grabbed a copy of the Gemma model and ran it, and it seemed to work without an issue for me directly on the host.

The advanced configuration settings no longer seem to directly mention GPU acceleration like it used to, however I can see it utilizing GPU resources in nvtop currently, and the speed it was generating at (the one in my screenshot was 83 tokens a second) couldn’t have possibly been done on the CPU so it seems to be fine on my side.

Yeah, I definitely am not a fan of how AMD handles rocm - there’s so many weird cases of “Well this card should work with rocm, but… [insert some weird quirk that you have to do, like the one I mentioned, or what you’ve run into]”.

Userspace/consumer side I enjoy AMD, but I fully understand why a lot of devs don’t make use of rocm and why Nvidia has such a tight hold on things in the GPU compute world with CUDA.

Ah, strange. I don’t suppose you specifically need a Fedora container? If not, I’ve been using this Ubuntu based distrobox container recipe for anything that requires ROCM and it has worked flawless for me.

If that still doesn’t work (I haven’t actually tried out kobolcpp yet), and you’re willing to try something other than kobolcpp, then I’d recommend the text-generation-webui project which supports a wide array of model types, including the GGUF types that Kobolcpp utilizes. Then if you really want to get deep into it, you can even pair it with SillyTavern (it is purely a frontend for a bunch of different LLM backends, text-generation-webui is one of the supported ones)!

What card do you use? I have a 6700XT and getting anything with ROCM running for me requires that I pass the HSA_OVERRIDE_GFX_VERSION=10.3.0 environmental variable to the related process, otherwise it just refuses to run properly. I wonder if it might be something similar for you too?

I did the same move for similar reasons! Although I still keep windows around on another SSS - and even the Windows Nvidia drivers were being funky for me.

Nvidia shares a lot of logic between their Windows and Linux driver as far as I’m aware, so I suppose it makes sense.

Arch Linux is the same as the last time I was in the hospital with my babies and I was wondering if you were going to be able to get a new one.

🤔

IIRC this was in regards to Microsoft wanting to close access to the kernel, while also still wanting to use kernel-level APIs for their security suite - which does come down to anticompetitive practices.

However, if Microsoft were not to offer separate products that used kernel-level APIs then in theory it would not have this same issue, which I assume is how Apple gets away with it. But, I am not a lawyer so its just speculation on my part.

Good god, I was finally prescribed Ambien for the first time recently, and I definitely now realize why it has the reputation that it does.

Along with Helldivers 2, I can confirm Apex Legends works as well. Valorant as far as I’m aware is a definite no-go though.

Just adding on, ProtonDB is a great resource for checking game compatibility!

As long as you’re still signed into BW from any of your devices, you can always export the vault from there.

(But yes, actual backups are always a plus)

I’m not the original person you replied to, but I also have a similar setup. I’m using a 6700XT, with both InvokeAI and stable-diffusion-webui-forge setup to run without any issues. While I’m running Arch Linux, I have it setup in Distrobox so its agnostic to the distro I’m running (since I’ve hopped between quite a few distros) - the container is actually an Ubuntu based container.

The only hiccup I ran into is that while ROCm does support this card, you need to set an environmental variable for it to be picked up correctly. At the start of both sd-webui and invokeai’s launch scripts, I just use:

export HSA_OVERRIDE_GFX_VERSION=10.3.0

In order to set that up, and it works perfectly. This is the link to the distrobox container file I use to get that up and running.

We believe in the open internet, but we do not believe in the misuse of public content.

That’s real rich, coming from Reddit.

This statement is false!

I had one of these done for an endoscopy - it ended horribly. It got “stuck” so I ended up having to have surgery for it to be removed.

Getting that surgery coordinated and scheduled took months all the while my health was declining. Eventually it got so bad that I couldn’t hold down food and I had to be pre-admitted to the hospital a month before the procedure and put on IV nutrition…

Granted I do have an autoimmune GI condition which is what prompted that test in the first place, and the chances of this happening is supposedly quite small but… Yeah I’ll take the endoscopy and colonoscopy over even that small chance of going through all of that all over again…