I need some advice on what hardware to buy for my home setup. I see a lot of posts talking about software, but not so much hardware. I would love to have a box I can buy and start setting up stuff.

A rack seems a bit expensive, my initial budget I feel is reasonable starting out is about $500-$800.

I’ve been looking at mini PCs, what are your thoughts on ASUS PN52? Just throwing that into the post to give a pin point of what I’m looking for.

I’m planning on hosting

  • Bitwarden
  • Nextcloud
  • Plex
  • Standard notes
  • Lemmy instance
  • Web server
  • Openresty

And need to be able to upgrade storage etc. for future proofing.

Thankful for all insights, tips, and suggestions!

  • director@some.institute
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    A lot of people start on used small form factor desktops like the ASUS PS52. Other common ones are the Lenovo M series tiny desktops, Dell Optiplex micro desktops or Intel NUCs. These can sometimes be found used for sub $100 a piece from businesses updating their fleets. They can struggle a bit doing stuff that needs some CPU grunt, like live plex transcoding, but are decent otherwise, especially considering the low power draw. You might want to consider spreading that software demand over two or three of them.

    • Caboose20@lemmy.ca
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Second this. Start with an old desktop and see where you land. it’s a good starting place to see what services you like using/need. Then you can spec out a second machine to solve any pain points you have.

    • Skyline@lemmy.cafe
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      live plex transcoding

      If you need this, the most cost-efficient way is probably to get an Intel CPU with an integrated GPU that supports QuickSync (all recent ones do) and pay for the lifetime Plex Pass. In the long run, it’s cheaper than getting a beefier CPU, let alone a dedicated GPU, just for transcoding.

      • maiskanzler@feddit.de
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        That also works with Jellyfin by the way. You can always switch over to Plex later, if you decide you need it and are willing to spend the money.