I’ve used wireguard for a pretty long time on my server and the phone as a client. I’ve had the same configuration for at least 4-5 years and never had issues. Last week I moved to using pihole in a container with a macvlan interface, so it has a different IP address than my physical server. Then I went and changed the DNS server IP on the wireguard config on the phone. When I reconnected I see I can’t connect to any local IP address like I used to and I can’t figure out why.
The local LAN is 10.11.12.0/24, the VPN is on 10.11.13.0/24.
Here’s the server wireguard config:
[Interface]
Address = 10.11.13.1
ListenPort = 11194
PrivateKey = ...
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o enp3s0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o enp3s0 -j MASQUERADE
[Peer]
# Galaxy S20+
PublicKey = U59JZqVbk2eFxTb7tteyu0WHlMTZsk68E7CF7v2AX2U=
AllowedIPs = 10.11.13.5/32
[Peer]
# narwhal - T480 job
PublicKey = Ja9OL13IoZA17GJq0/LbwizB9s2dRQLHHgW2C4TcFyY=
AllowedIPs = 10.11.13.7/32
And here’s the phone’s wireguard config:
Address = 10.11.13.5/24
DNS = 10.11.12.55
PrivateKey = ....
[Peer]
AllowedIPs = 10.11.0.0/16
Endpoint = my_dyndns_hostname:11194
PublicKey = 6aF1cJhH9oeQWr9LYOpH3wk+lN4k9/tSiAqV6LkUQ1Y=
I am able to connect and can ping 10.11.12.77, the IP address of the server, but nothing else. I have two RPis running as mpd servers and I used to be able to connect to them too, but not anymore. Their IP addresses are 10.11.12.105 and .106.
Also, before the dns change I was able (of course!) to use the local DNS I set up on the pihole, but now I’m not able to connect to the new DNS (.55) so I can’t get any local address to resolve.
I’m looking for some hints on what I’m doing wrong. Please help.
You must log in or register to comment.
Try changing your NAT rule to
“iptables -t nat -A POSTROUTING -s 10.11.13.0/24 -o eth1 -j MASQUERADE”
Also try changing your AllowedIPs to 10.11.13.0/24
The other issue may be the ability of the host/server to reach the IP address of the pihole macvlan interface. Have a look at this page, it’s helped me out before -> https://adventurenotvacation.com/2020/12/01/docker-macvlan-and-debian/
Try changing your NAT rule to
“iptables -t nat -A POSTROUTING -s 10.11.13.0/24 -o eth1 -j MASQUERADE”
Also try changing your AllowedIPs to 10.11.13.0/24
In fact I don’t need to access anything on 10.11.12.13.0/24 - that’s the peer to peer wireguard network. I want to be able to connect to any host on 10.11.12.0/24. Adding this network to AllowedIPs I’m now able to connect to .77 (which is my server) and to .1 (the router), but not on any other hosts in the house.
The other issue may be the ability of the host/server to reach the IP address of the pihole macvlan interface. Have a look at this page, it’s helped me out before -> https://adventurenotvacation.com/2020/12/01/docker-macvlan-and-debian/
This is done. I followed the instructions here: https://wiki.omv-extras.org/doku.php?id=omv6:omv6_plugins:docker_compose#how_to_create_a_vlan_with_ip_on_the_same_lan_as_the_host which are the same thing as the article you linked.
… I’m still looking into things.
You only need the masquerade rule.
iptables -t nat -A POSTROUTING -s 10.11.13.0/24 -o enp3s0 -j MASQUERADEdidn’t help, unfortunatelly.
Did you enable forwarding via sysctl?
sysctl net.ipv4.ip_forwardThis should report
1Yes. That was one of the first checks I did.
Coming back to this: it was a case of “did you turn it off and then back on?” I did some server upgrades a day before setting up wireguard and it’s possible there were some changes that needed a reboot. I just rebooted today and everything works as expected.
